Additional information

Product code and colour

FIX-SEAL/M (black, light grey), FIX-SEAL/S (black), FIX-SEAL/H (black, light grey)

Thickness

0.8 mm, 1.5 mm, 3 mm, 4.5 mm, 6 mm, 12 mm, 15 mm

Width

ORDER

Quantity

ORDER

PVC self-adhesive frame gaskets

Structural and frame gaskets. Carcass gasket, carcass sealing tape. Façade gaskets, plinth gaskets, plinth gaskets, self-adhesive gaskets, joint gaskets, joint tape.

For sealing non-solid building constructions (not resistant to mechanical wear), among other things, due to its softness and elasticity, very suitable for sealing longitudinal overlaps of various roof steel profiles for water-tight sealing, as well as for sealing between facade tile materials and the frame under certain conditions, including when sandwich panels are installed, and with the best properties as a noise insulation sealant for lightweight partition walls (i.e. as a frame sealant).

Material from: elastic, impermeable PVC foam, coated on the underside with an acrylic adhesive with good adhesion, on the upper side with a protective, removable silicone paper or polyester film, air, dust or water tight depending on density and compression, resistant to weak chemicals, UV radiation and humidity;

Colour: black or grey depending on the thickness and type of material;

Density: 90-260 kg/m3; soft (S), medium (M) or hard (H)

Average temperature tolerance: -30°C+70°C, recommended installation temp.+10°C + 40°C;

Product sheets:

TDS FIX-SEAL_M.pdf | TDS FIX-SEAL_S.pdf | TDS-FIX-SEAL_H_eng.pdf

Structural and frame gaskets. Carcass gasket, carcass sealing tape. Façade gaskets, plinth gaskets, plinth gaskets, self-adhesive gaskets, joint gaskets, joint tape.

Structural and frame gaskets. Carcass gasket, carcass sealing tape. Façade gaskets, plinth gaskets, self-adhesive sealing tapes, joint sealant, joint tape.